How to Read a Certificate of Analysis (COA)

A certificate of analysis, or COA, is a lab's report on one batch of material. It tells you what was tested, how it was tested and what the results were. For anyone ordering research peptides, it's the most useful document you can ask for. It only helps, though, if you know how to read it.

This guide walks through each part of a typical peptide certificate, in the order you'll usually meet it. Every product we sell links to its certificates in our COA Library, so you can follow along with a real one open.

Start with the header: product, batch and date

The top of a certificate names the product and the amount per vial. Check both against what you ordered. A certificate for a 5 mg vial doesn't describe a 10 mg vial of the same compound, because each size is usually made and tested as its own batch.

Next is the batch or lot number. This is the code that ties the report to one production run. In standard quality terms, a lot number is any combination of letters and numbers from which the history of a batch can be traced. Match the batch number on the certificate to the one on your vial or order. If they don't match, the certificate describes a different batch.

The header also shows a date, usually when the sample was analyzed or the report was issued, and often the name of the testing lab. Keep in mind that a certificate describes the batch as it was on the day it was tested.

Identity: is it the right compound?

An identity test answers one question: is the material in the vial the compound named on the label? Labs use different methods, and each certificate lists the one it used.

  • Mass spectrometry measures the molecular mass of the material and compares it with the expected mass of the compound. It is often paired with liquid chromatography, which separates the sample first.
  • Retention time and UV spectrum compare when the main peak comes off the chromatography column, and how it absorbs ultraviolet light, with a reference standard of the same compound.

You'll see both kinds in our library. The result is usually shown as a match or a pass, sometimes with the measured value next to the expected one.

Purity: how much of the peptide material is the target

Purity is usually measured by high-performance liquid chromatography. The instrument separates a sample into its components and records each one as a peak. The purity figure is the area of the main peak as a share of the total area of all the peaks the detector picked up.

That number tells you how much of the peptide-related material in the sample is the target compound, as opposed to closely related by-products such as shortened or incomplete sequences [1]. It doesn't tell you everything. Water and the counter-ion salts that peptides carry from manufacturing aren't counted, for example [2].

On the certificate, look for three things: the method, the result, and the specification the result was measured against. Many certificates also state whether the result conforms to that specification.

Net content vs. the label amount

Purity and content are different measurements, and they're easy to mix up.

  • Purity asks: of the peptide material in the sample, what share is the target compound?
  • Content (sometimes called quantity or net content) asks: how much of the compound is actually in the vial?

A vial labeled 10 mg should hold about 10 mg of the compound. The content result shows the measured amount, and a conformity line shows whether that amount falls within the accepted range around the label claim. A sample can score high on purity and still hold a little more or less than the label amount. That's why a useful certificate reports both.

Other tests, and what isn't there

Some certificates include extra results. Depending on the product and the lab, you might see solubility, appearance, pH for liquids, or a photo check confirming the vial tested matches the product.

What's missing matters just as much. A certificate covers only the tests printed on it. If a test isn't listed, the report doesn't cover it. Don't assume a batch was checked for something just because another seller's certificate lists that test.

Checking that a certificate is genuine

A certificate is only as good as its link to the batch. In one published study, researchers retested a set of synthetic research peptides and found that fewer than half met the required purity, with large gaps between their results and the purity stated on the suppliers' certificates [3]. Here's what to check:

  1. The record can be looked up. Many testing services host each certificate online with its own certificate ID. Every certificate in our COA Library opens on the issuing service's verification page, which shows the certificate ID, batch, report date, the lab that ran the tests, the methods used and whether the record is valid.
  2. The details line up. The product name, amount, batch number and date should agree with each other and with your order.
  3. Nothing looks altered. Mismatched fonts, a missing batch number or a certificate for a different size are all reasons to ask questions.

If anything doesn't match, contact the seller before relying on that batch in your research.

Finding the certificate for your batch

To find a certificate on our site:

  1. Open the COA Library.
  2. Find the product and size you ordered.
  3. Open the certificate and confirm that the batch number matches your vial.

Each product page in our shop also links to its certificates. If you can't find the one for your batch, email support@veritascompound.com and we'll help.

References

  1. D'Hondt M, et al. Related impurities in peptide medicines. Journal of Pharmaceutical and Biomedical Analysis. 2014;101:2-30. doi:10.1016/j.jpba.2014.06.012
  2. Sikora K, Jaśkiewicz M, Neubauer D, Migoń D, Kamysz W. The role of counter-ions in peptides: an overview. Pharmaceuticals. 2020;13(12):442. doi:10.3390/ph13120442
  3. Verbeke F, Wynendaele E, Braet S, D'Hondt M, De Spiegeleer B. Quality evaluation of synthetic quorum sensing peptides used in R&D. Journal of Pharmaceutical Analysis. 2015;5(3):169-181. doi:10.1016/j.jpha.2014.12.002

For laboratory research use only. Not for human or animal use.